Hundegger ROBOT-Drive machine The     new     Hundegger     ROBOT-Drive     joinery     machine perfectly    combines    the    advantages    of    a    brand    new machine   concept   with   the   experience   of   more   than   4.700 Hundegger machines delivered worldwide. This    new    machine    generation    features    especially    high flexibility,   minimal   space   requirements   and   low   cost.   The ROBOT-Drive    is    the    perfect    solution    for    timber    frame construction     companies     who     need     a     highly     flexible machine    with    almost    unlimited    processing    capabilities. The   ROBOT-Drive   can   process   all   kinds   of   typical   joinery products currently used in carpentry. Models The    machine    is    available    as    a)    ROBOT-Drive    and    b) ROBOT-Drive-Solo.   The   only   difference   between   the   two machines          is     the     additional     5-axis     universal     saw aggregate   in   the   ROBOT-Drive   -   the   Solo      model   comes without it. Machine size Both machines are in three different sizes available. ROBOT-Drive 450 from   20   x   60   mm   to   300   x   450   mm   (¾   x   2   3/8”   to   11   ⅞   x 17 11/16”) The standard machine for every timber frame company ROBOT-Drive 625 from   20   x   60   mm   to   300   x   450   mm   (¾   x   2   3/8”   to   11   ⅞   x 29 9/16”) For the trend towards lager dimensions ROBOT-Drive 1250 from   20   x   60   mm   to   300   x   1250   mm   (¾   x   2   3/8”   to   11   ⅞   x 49 3/16”) The     solution     for     the     most     demanding     applications including glue lam beams ROBOT-DRIVE Brochure Please   check   the   attached   ROBOT- Drive    bro chure   to   find more   information   about   the   whole   system.   You   are   also very   welcome   to   contact   us   for   more   detailed   information on our products.